Member State report / Art11 / 2014 / D6 / Belgium / NE Atlantic: Greater North Sea

Report type Member State report to Commission
MSFD Article Art. 11 Monitoring programmes (and Art. 17 updates)
Report due 2014-10-15
GES Descriptor D6 Sea-floor integrity/D1 Benthic habitats
Member State Belgium
Region/subregion NE Atlantic: Greater North Sea
Reported by Reporter not found
Report date Date not found
Report access
Monitoring programme Monitoring programme name
MP_D1_4_6_SeabedHabitats
Monitoring programme Reference existing programme
Monitoring programme Marine Unit ID
Q4e - Programme ID
ANSBE-D1, 4, 6 Seabed habitats
Q4f - Programme description
The Belgian MSFD monitoring programme ‘Biodiversity - seabed habitats’ aims at assessing the following ETs: • ET7 : The spatial extent and distribution of the EUNIS level 3 habitats (sandy mud to mud, muddy sands to sands and coarse grained sediments), as well as that of gravel beds fluctuate - relative to the reference state as described in Initial Assessment - within a margin limited to the accuracy of the current distribution maps • ET10: The Ecological Quality Ratio as determined by BEQI, indicative for benthic ecosystem structure and quality, has a minimum value of 0,60 in each of the habitat types • ET11: Positive trend in median adult density (or frequency of occurrence) of at least one species within the long-lived and/or slowly reproducing and key engineering benthic species groups in both mud to muddy sands and pure fine to coarse sands • ET12: Spring median benthic bioturbation potential (BPc) in the Abra alba habitat type is higher than 100 • ET13: Positive trend in median colony/body size of the sessile, long-lived and/or larger benthic species Buccinum undatum, Mytilus edulis, Flustra foliacea, Haliclona oculata and Alcyonium digitatum • ET14 – Positive trend in frequency of occurrence and median adult density of at least half of the key and long-lived species Ostrea edulis, Sabellaria spinulosa, Mytilus edulis, Buccinum undatum, Haliclona oculata, Alcyonium digitatum and Alcyonidium spp • ET15 – No loss or positive trend in species richness within all key hard substrate taxa, i.e. Porifera, Cnidaria, Bryozoa, Polychaeta, Malacostraca, Maxillopoda, Gastropoda, Bivalvia, Echinodermata and Ascidiacea • ET16 – Decreasing relative frequency of occurrence of damaged Asterias rubens (2+ cm arm length) and tube clusters of Pomatoceros triqueter, indicative for physical disturbance of the bottom (= pressure indicator), as to enhance natural development of the gravel bed ecosystem (= desired state) • ET17: For each of the scavenging seabirds species, are the mean densities over 5 consecutive years not below the minimum defined by the Birds Directive favourable conservation status Six sub-programmes can be discerned: • ANSBE-D1, 4, 6 Seabed-SP5 (delivering data to assess ET7), targeting a full-coverage seabed and transect seabed mapping of selected areas at EUNIS level 3; • ANSBE-D1, 4, 6 Seabed-SP6 (delivering data to assess ET10), targeting the quantification of a composite index based on density, biomass, species richness and species composition of the macrobenthos at selected stations in the BPNS; • ANSBE-D1, 4, 6 Seabed-SP7 (delivering data to assess ET11), targeting the quantification of long-lived and key engineering benthic species density at selected stations in the BPNS; • ANSBE-D1, 4, 6 Seabed-SP8 (delivering data to assess ET12), targeting the quantification of the macrobenthic community bioturbation potential at selected stations in the BPNS; • ANSBE-D1, 4, 6 Seabed-SP9 (delivering data to assess ET13 to 16), targeting body/colony size of characteristic hard substrate species, frequency of occurrence and densities in a non-bottom fisheries-impacted, a low impacted and regular fisheries-impacted area; • ANSBE-D1, 4, 6 Seabed-SP10 (delivering data to assess ET17), targeting multibeam bathymetry and backscatter measurements in combination with visual observations and seabed sampling in a gravel bed in the Hinder Banks region and a gravel bed in the Flemish Banks region
Q5e - Natural variability
  • Quantiative
Q5d - Adequacy for assessment of GES Q5d - Adequate data
N
Q5d - Adequacy for assessment of GES Q5d - Established methods
Y
Q5d - Adequacy for assessment of GES Q5d - Adequate understanding of GES
Y
Q5d - Adequacy for assessment of GES Q5d - Adequate capacity
Y
Q5f - Description of programme for GES assessment
Q5g - Gap-filling date for GES assessment
By2018
Q5h - Plans to implement monitoring for GES assessment
A research proposal has been submitted to the Belgian Science Policy Office to strengthen capacity to develop improved methods and strategies for the acoustic mapping of seabed/habitat types in a monitoring context, hence emphasising on quantifying uncertainties in the mapping process needed for accurate change detection
Q6a -Relevant targets Q6a - Environmental target
Target 7 Target 10 Target 11 Target 12 Target 13 Target 14 Target 15 Target 16 Target 17
Q6a -Relevant targets Q6a - Associated indicator
Target 7 Target 10 Target 11 Target 12 Target 13 Target 14 Target 15 Target 16 Target 17
Q6b - Adequacy for assessment of targets Q6b_SuitableData
Y
Q6b - Adequacy for assessment of targets Q6b_EstablishedMethods
N
Q6b - Adequacy for assessment of targets Q6d_AdequateCapacity
N
Q6c - Target updating
N
Q6d - Description of programme for targets assessment
N.A.
Q6e - Gap-filling date for targets assessment
By2018
Q6f - Plans to implement monitoring for targets assessment
A research proposal has been submitted to the Belgian Science Policy Office to strengthen capacity to develop improved methods and strategies for the acoustic mapping of seabed/habitat types in a monitoring context, hence emphasising on quantifying uncertainties in the mapping process needed for accurate change detection
Q7a - Relevant activities
Q7b - Description of monitoring of activities
Q7c - Relevant measures
Q7e - Adequacy for assessment of measures Q7d - Adequate data
Q7e - Adequacy for assessment of measures Q7d - Established methods
Q7e - Adequacy for assessment of measures Q7d - Adequate understanding of GES
Q7e - Adequacy for assessment of measures Q7d - Adequate capacity
Q7e - Adequacy for assessment of measures Q7d - Addresses activities and pressures
Q7e - Adequacy for assessment of measures Q7d - Addresses effectiveness of measures
Q7d - Description of monitoring for measures
Q7f - Gap-filling date for activities and measures
By2014
Q8a - Links to existing Monitoring Programmes
  • WFD
Reference sub-programme Sub-programme ID
Reference sub-programme Sub-programme name
Seabed habitats - distribution and extent
Q4g - Sub-programmes Sub-programme ID
Q4g - Sub-programmes Sub-programme name
Seabed habitats - distribution and extent
Q4k - Monitoring purpose
Q4l - Links of monitoring programmes of other Directives and Conventions
Q5c - Features Q5c - Habitats
Q5c - Features Q5c - Species list
Q5c - Features Q5c - Physical/Chemical features
  • TopographyBathymetry
Q5c - Features Q5c - Pressures
Q9a - Elements
Q5a - GES criteria Relevant GES criteria
  • 1.2
  • 1.3
  • 1.4
  • 1.5
  • 1.6
  • 6.1
  • 6.2
Q5b - GES indicators Relevant GES indicators
  • 1.2.1
  • 1.3.1
  • 1.4.1
  • 1.4.2
  • 1.5.1
  • 1.6.1
  • 1.6.3
  • 6.1.2
  • 6.2.2
  • 6.2.3
Q9b - Parameters monitored (state/impact) Species distribution
Q9b - Parameters monitored (state/impact) Species population size
Q9b - Parameters monitored (state/impact) Species population characteristics
Q9b - Parameters monitored (state/impact) Species impacts
Q9b - Parameters monitored (state/impact) Habitat distribution
Q9b - Parameters monitored (state/impact) Habitat extent
Q9b - Parameters monitored (state/impact) Habitat condition (physical-chemical)
Q9b - Parameters monitored (state/impact) Habitat condition (biological)
Q9b - Parameters monitored (state/impact) Habitat impacts
Q9b - Parameters monitored (pressures) Pressure input
Q9b - Parameters monitored (pressures) Pressure output
Q9b - Parameters monitored (activity) Activity
Q9b Parameters monitored (other) Other
Q41 Spatial scope
Q4j - Description of spatial scope
Marine Unit IDs
  • ANS-BE-MS-1
Q4h - Temporal scope Start date- End date
-
Q9h - Temporal resolution of sampling
Q9c - Monitoring method
Q9d - Description of alteration to method
Q9e - Quality assurance
Q9f - Quality control
Q9g - Spatial resolution of sampling Q9g - Proportion of area covered %
Q9g - Spatial resolution of sampling Q9g - No. of samples
Q9i - Description of sample representivity
Q10a - Scale for aggregation of data
Q10b - Other scale for aggregation of data
Q10c - Access to monitoring data Q10c - Data type
Q10c - Access to monitoring data Q10c - Data access mechanism
Q10c - Access to monitoring data Q10c - Data access rights
Q10c - Access to monitoring data Q10c - INSPIRE standard
Q10c - Access to monitoring data Q10c Date data are available
Q10c - Access to monitoring data Q10c - Data update frequency
Q10d - Description of data access